A spirit level and a pencil are your next best friends

If this is the case, do remember to use the Redwood or Cedar for the Outer Joists and End Beam, because although they form part of the under support frame they are visible when looking back at your deck from the garden.Remember also, in the final part of construction, your surface decking boards will be secured on top of the side surface of your ledger and joists, so:Leave a 1″ — 2″ drop from your doorAllow for the size of your decking boards – that will be another 2″So, measure 3″ — 4″ down from your indoor floor levelAnd mark the wall showing the highest point of the ledger

A spirit level and a pencil are your next best friends, you shouldn’t try to place a deck building ledger without them.Galvanised four inch lag screws will secure your ledger into the wall and give you a level and firm foundation to build your deck design onto.It is really important that you allow for a couple of inches step down onto your deck from your door, this is to help prevent rain water from running off the deck and into your home.Choose the piece of lumber for your ledger carefully, hold it up and look down the side of the wood to check for irregularities like warping and twisting.

The Deck Building Ledger holds all the secrets to successful deck construction because it is the essential piece of wood that connects your deck to your home and from which all other measurements are taken.Many people who opt for a more expensive option in lumber still use regular pressure treated wood for the deck building ledger and the joists because these are parts of the support of a deck that will NOT be visible.

If you are building XM Automobile Service Suppliers deck made out of only redwood or cedar then this doesn’t apply to you, but otherwise, please make sure that you are only using pressure treated lumber.Choosing your LumberThe ideal deck building ledger should be free of ingrown knots and flaws, or at least only have very small knots.

0 kommentarer