Månadsvis arkiv: juni 2022

Home Laser Engraver Atomstack A5

The entire setup of the laser engraver takes only 10 minutes. Descriptions including illustrations are exemplary. The screws are even packed together according to individual steps, so assembly is no problem at all, even for the absolute layman. We’ve been enthusiastic so far – with this no-hassle build and good written documentation, some 3D printer makers could learn a lot from it.

After construction was completed, we first looked for an open space in the basement. This should provide enough space and have ventilation options. If you have pets or children in your home, you should also ensure that they cannot access the laser while it is running.

The planks below not only protect the floor or table top, but also serve as a positioning aid. Before carving, we draw a perfectly fitting frame around our subject and burn it into the plank. So we can see exactly where we have to place the actual workpiece.

The main software recommended by the manufacturer is LaserGRBL open source software. This worked, but we found it relatively confusing, cumbersome, and less intuitive. As an alternative, we therefore use a software called Lightburn, also named by the manufacturer. The program costs less than 40 euros, but you can try it for free for 30 days. If you choose a laser engraver, you should also plan for this budget. From our perspective, the investment is worth it.

cheap atomic laser engraving

After launching the software and setting up the connected laser once, Lightburn will display the engraver’s workspace. Now import the desired template, pixel or vector graphics and adjust the size and position. Besides JPEG, TIFF or DXF, the software supports many other formats. We now place a frame around the object and adjust the settings for speed and laser power. As a first step, we just issued the frame and burned it into our base to determine the exact location of the engraving. Then we locate the actual workpiece and output the desired pattern in the second step.

The laser now follows the pattern and burns it into the underlying surface. The laser changes speed and power to show shades of gray. The result is aging zones of different widths, which can be more or less easily distinguished depending on the material. Small fonts take just a few minutes to complete, while larger pieces take longer. In Lightburn you can see how long the whole process takes.

The Atomstack A5 is easy to use and suitable for users with 3D printing experience and those with a basic understanding of the technology. At the beginning of the test, we only cared about the reliability of the goggles and goggles. Since our engraver is on the ground, the included privacy screen alone will do the job well. If the laser were on the table, the angle would be different and the privacy screen would be largely useless. But with the glasses on, we felt fine and were able to watch the laser for a few minutes at work without feeling any negative effects. Even if you don’t look directly at the laser, headaches and burning eyes can be signs of damage. You really have to be careful here! Using such a machine is not without risk. You have to decide for yourself whether you want to do this. It’s safest if you just observe the work process with a camera.

Engraved leather or imitation leather also works well. However, the smoke and smell are really unpleasant. You should work with low power here so as not to burn the material. While the attempt with the smartphone case looked fine, the loose leather deformed violently during the engraving process. To get good results, the material must be stretched onto a piece of wood. Headphone cases made of faux leather are much better sculpted. Here, we limit performance to 35%.

Atomstack p7 m40

If you don’t trust the included glasses, you can also purchase protective glasses for that wavelength separately. In the medium term, we’ll still be tinkering with a box that acts as a privacy screen. This will reduce the risk to pets and family members and allow an efficient extraction device to be installed. Even if the laser only removes a thin layer of the surface, those layers will burn, creating smoke and odors in the process.

a10 pro laser engraver

0 kommentarer

Customize your gift with laser engraving

Laser engraving produces high-quality, unique novelty items and gifts that are guaranteed to leave a lasting impression on your customers. Whether you’re custom engraving a piece for a special occasion or mass-producing an item, laser engraving is capable of producing stunning visual items and personalized messages.

Create unique designs using fingerprints, photos or handwriting. Transform any sketch, drawing or graphic image into a custom engraved artwork. When it comes to laser engraving, the only thing holding you back is your imagination.

atomstack s20 pro laser engraver

Compatible with a wide range of materials, Atomstack laser engraving machine are easy to use, versatile and economical to own and operate. Our laser engraving software is user-friendly and easy to learn. Expand your business today by customizing a wide range of one-of-a-kind gifts and novelty items.

The most unique, touching, and memorable gifts tend to be those that show that it takes some thought, time, and effort to create. Everyone loves a custom or personalized gift.

Not only do diode lasers allow you to showcase your creative talents, they also allow you to deliver one-of-a-kind, expressive pieces that people will treasure and treasure for years to come. Diode laser machines enable you to permanently laser engrave or etch photos, images, logos, designs and messages on all types of organic material surfaces, whether as a gift, hobby or for the profit of your small business. Adding a simple logo, message, name or image can add tremendous perceived value to any project.

If you want to start your own business, using a laser cutter in the custom engraved gift industry is a niche market that offers virtually unlimited earning potential for both online and brick-and-mortar businesses.

When it comes to gifting loved ones and friends, there’s nothing more rewarding than a highly personalized keepsake. We specialize in custom laser engraved products for all occasions. Atomstack engravers can help you create beautifully designed pieces that will delight the recipient of your gift. In addition to gifts, we can customize products for a variety of uses, including home decor, memorabilia, business plaques, sports awards, and even industrial signage.

atomstack p9 m50

0 kommentarer

Amazing Laser Engraver Project Ideas

Affordable laser engraving machines are becoming more and more popular and, more importantly, more powerful. With the machines we’ve tested, you can do more than sculpt!

Making your own brings a certain level of satisfaction. When you get something done and it looks good, you feel proud, or know that you can produce a high-quality product without paying for it.

The best way to beat the winter blues is to keep your brain sharp with some DIY puzzles. Wooden puzzles are a great way to spark creativity and imagination. This is a fun one to keep you on your toes and it can be made entirely with a good laser engraver! The price of laser engravers has dropped significantly over the past few years, making it more accessible than ever for hobbyists and manufacturers alike. This project is a simple introduction to using a laser engraver and building wooden puzzles.

The holidays are just around the corner and we’re all scrambling to finish shopping, but why not take a break and try something new? This year, for your gift-giving needs, consider using a laser engraver to make acrylic jewelry. First, you need to download the image file you want to engrave on acrylic. You can find a lot of designs on websites that offer free vector designs. If you don’t have vector malware, but a regular image, use a program like Inkscape to create a vector version of your design, where you’ll convert it into an outline drawing called a ”path”. Finally, upload this path to your laser engraving software and it will cut on the material.

3d printer laser cutter P9 M40

This machine can easily cut dark acrylic. The easiest to cut is black acrylic, but here I am trying to cut the yellow one. This machine requires about twice as many passes as the black machine because yellow reflects more light than dark. But it cuts this cool fish nicely. I filled in the carving with some black spray paint and wiped off the excess with a cloth soaked in acetone and it turned out great!

I bet you think laser engraving is just for making art or cutting material. Well, I’m here to show you how to make rubber stamps with a atomstack a5 m50 pro laser engraver! The process is so simple that anyone can do it using a few materials from the hardware store. All you need is a laser engraver and a little time.

I used moderate power and speed and used cross padding. It turned out a little burnt, but cleaned up nicely with a damp paper towel. The carving is deep and the edges are nice. It is always recommended to use a q-tip and isopropyl alcohol to clean the lens after engraving rubber or other dusty materials. This ensures that the laser is always operating at maximum power.

We’ve found a way for you to learn paper crafting on your own! It’s so easy – just plug it in, download a free design template or upload your own and start tailoring your own designs right away! You can definitely tell that this is the first paper product I’ve made. I still need some bonding practice.

This machine can cut thick paper like butter. I’m trying to do some papercraft based on plans I got from the internet. By lowering the power you can mark the line where the bend is and then the paper bends easily.

Paper crafting is a fun hobby. You can make your own cards and artwork, and even make some useful items like coasters or gift boxes.

atomstack 130w

atomstack air assist

0 kommentarer

Laser Engraving Safety Precautions

Using a laser engraver can be very dangerous and toxic to your health. To protect yourself from smoke and beams, you need to do the following:

Laser beam protection
Lasers can cause serious damage to your eyes. For safety, you must consider wearing laser safety glasses. When choosing a protective tool like this, you should consider glasses that directly complement the type of laser engraver you are using.

This should be easy as laser information can be found in the instruction manual. This includes information such as optimal density and wavelength range, usually in nanometers. Alternatively, you can consult a laser safety officer. Make sure to wear laser glasses during the engraving process and only remove them when you stop using the device.

Smoke
Laser cutters are prone to generating fumes, particulates, metal fumes and vapors from potentially highly toxic substrates. It is important to wear personal protective equipment (PPE) when operating the laser cutter. In addition to this, workshops using these tools must be equipped with a suitable filtration system, which is important to reduce the chance of toxic fumes causing health hazards.

Atomstack P7 M30 Laser Engraver

P7 M30 laser engraver projects

To keep pace with the Occupational Safety and Health Administration (OSHA), laser cutting shops should be equipped with fume extractors that comply with prescribed protocols. Smoke extractors are ideal for such workplaces as they help extract dangerous fumes from the air, protecting you from heavy metals and toxic particles.

Potential side effects of laser smoke exposure include:

Metal Fume Fever: This is usually caused by zinc fumes released when cutting certain steel alloys. Common symptoms of zinc fumes include pain, cough, flu, and fever.

Irritation: Exposure to chemicals can irritate eyes, skin, mouth and noise.

Toxic Chemical Buildup: Over time, toxic fumes can build up in the body, causing unwanted chemical reactions. This can eventually lead to lead poisoning and kidney problems.

Exposure to carcinogenic compounds is very common, especially when there is hexavalent chromium. This is a dangerous particle that can cause cancer. In addition to this, multiple studies have shown that this nasty particle can immediately cause a variety of side effects, such as skin ulcers, irritation of the nose, mouth, and eyes.

Atomstack A5 30w Laser Engraver

atomstack 30w laser cutter for wood

Air circulation
Laser machines, especially those involving carbon dioxide, often emit dangerous fumes, which is why these devices require exhaust. Therefore, you should consider working in a well-ventilated space. While modern laser engraving systems are designed with exhaust ventilation systems to keep the air inside the laser cutter and around the laser safe, make sure you open doors and windows for free airflow.

Other additional safety measures include:

Store with proper equipment: Your protective eyewear should always be stored in separate cases and secure units. This will help minimize exposure to contaminants and eliminate scratches.

Adhere to prescribed laser engraving protocols: Make sure your facility complies with laws and regulations regarding the use of laser cutters in the workshop.

Use Warning Signs: Use warning signs if you have a lot of human activity in your workshop. These should be easy-to-read signs that are correctly placed and designated (e.g. entry).
Always clear debris: Remove flammable materials and debris that have built up after using the laser cutter. Other than that, don’t immediately remove the material from the cutting bed; wait until it cools down.

Atomstack R3

best atomstack r3

0 kommentarer

How does a laser engraver etch glass?

Glass etching is a creative way to connect minds, eyes and hands to create unique and eye-catching designs. Of all the applications in the engraving world, glass has always been a favorite of many. This approach allows users to personalize their creations with elegant and striking marks, including wine glasses, photos, plaques and other glass etching ideas. Unlike vinyl applications, the glass etched design resists fading or peeling and is dishwasher and microwave safe. This method has many new users thinking about how to etch glass as a beginner in laser engraving.

Glass etching

Some of the key advantages of laser etching include:

Accuracy: The laser beam engraves the smallest and most delicate designs and reproduces the same precise designs when needed.

High Efficiency: The laser beam is faster and more streamlined. Some laser engravers are equipped with dual laser heads for increased productivity or for high volume projects.

Faster Redundancy: ATOMSTACK laser engravers are ideal because they can cut thicker materials, have faster pierce performance, and can cut straight lines faster.

Consistency: Since designs are saved as files, they are replicated repeatedly while still maintaining the same size, height and dimensions.

Reduce environmental waste: Laser engravers do not require harmful chemicals that are flushed down the drain or evaporated in the air. Any dust particles emitted are immediately vaporized by the laser beam.

Safety: Laser engravers operate from a distance rather than nearby. Safety features include an emergency stop button, built-in ventilation system and a tan viewing window to protect the eyes from direct contact with the laser beam.

Atomstack S10 Pro

wood laser engraving machine S10 Pro

Compatible with other materials: including wood, leather, acrylic and metal.

Place laser engravers in a well-ventilated area, as they may emit fumes and dust. It is recommended to use a fume extraction system, buy it or make it by hand.

When shopping for a laser engraver, don’t forget to buy a rotary or cylindrical attachment. The swivel attachment allows precise etching on tapered items with consistent curves, such as wine bottles, vases or shot glasses. Make sure the attachment is adjustable to fit various glass shapes and sizes.
Laser engravers are best for less expensive glassware for everyday use, such as etched glass bottles, pint glass, etc. Crystal or other types of high-end glass have a higher lead content and therefore tend to retain too much heat. Using crystal or high-end glassware may cause the final image to crack, break or change.

Since too much heat from the laser can cause chipping, cracking, or blurred images, apply a thin layer of dish soap or a piece of damp newspaper to the area that will be lasered. This will dissipate heat and prevent overheating. After the laser, rinse off any remaining residue.
Finding inspiration while learning how to make each glass is as easy as ever.

New Arrival: ATOMSTACK S20 Pro

0 kommentarer

Top Wood Laser Engraving Machines

Laser wood engraving machines are one of the best-selling devices on the market in early 2022. The reason for this popularity is that it is the easiest and most convenient way to decorate the interior elements of wood in your home. And wood carving is one of the competitive advantages of wooden furniture enterprises.

laser engraver for woodworking

Therefore, most entrepreneurs equip their woodworking shop with a wood laser engraver. It also reduces the cost of manufacturing furniture and interior elements.

Such specialized equipment is quite expensive in the world market. European laser equipment manufacturers offer prices starting at $2000 for desktops. However, you can always find the best value for money. So even taking delivery into account, a Chinese machine could cost half as much as the same or even better quality.

The quality, reliability and functional characteristics of a laser cutting machine not only affect the financial profits of a company, but also the success of the entire business.

Laser engraving machine – what type of machine it is and where it can be used
ATOMSTACK laser engraver is a printer except that instead of a print head, it has a laser beam. And this beam doesn’t print, but burns the material, in this particular case wood. Depending on the power of the beam, the engraving or material is obtained.

best laser engraver for wood

Souvenirs, furniture, furniture, cardboard packaging – these are just a few of the items that can be engraved with a laser CO2 machine. If you need to craft more items.

To order and purchase high-quality, reliable laser equipment, you need to understand the characteristics of the machine components, evaluate the quality, and then make a purchasing decision. Alternatively, you can trust the quality of one of the market leading brands of CO2 lasers and spend more time on how to develop your product to achieve perfect product quality without undue effort.

The latest online catalogue contains products certified according to international and European standards (ISO and EN), which guarantee high-quality assembly, highest precision and reliability of all components.

What to pay attention to when choosing a laser engraving machine
The product you plan to manufacture on the laser machine and the expected output are key aspects to consider when choosing a laser wood engraving machine.

This will help you decide on the optimal working area size and power for your machine. For example, cutting 10 mm plywood requires at least 100 W of laser power. However, it is strongly recommended not to use laser tubes at full power, the generally accepted optimal power level is 75-80%, which means you need to take an oversized tube. As a result, the CO2 laser tube will have a longer life, saving components.

0 kommentarer

ATOMSTACK P9 M50 50W Portable Laser Engraver

The P-series is a cantilevered design, which is a great success with the ATOMSTACK P7 M40 – after all, there are still many users who prefer smaller devices. Small devices in the traditional sense usually mean low performance and cheapness. But you may have to break the traditional thinking, this time the P9 M50 is really powerful. Except for the smaller engraving area, the core component laser module is the same as the X7 Pro M50 50W.

P9 M50 laser cutter and engraver

The ATOMSTACK P9 has a modular design that users can install in under 10 minutes. Portability and ease of use are its distinguishing features, and of course, the framed X7 Pro is also easy to set up, usually in just 15 minutes.

I would say that this model is probably the most powerful portable laser engraver on the market today, and the most powerful framed model is undoubtedly the X7 Pro. This is mainly because they are all equipped with the M50 dual laser source module, which couples two 5W laser sources into one 10W light source, and coupled with the compressed spot technology, it can easily cut 20mm wood and 15mm acrylic. In addition, its engraving capabilities on metal surfaces have been enhanced.

I think offline work will become more and more popular in the minds of consumers. Just copy all the files that need to be worked on to the TF card, and then control the engraving task through the touch screen. Of course, the premise is that we also need to install LaserGRBL or Lightburn software on the computer. We first import the image format into the software, and then export the engraving or cutting file, because the engraving machine can only recognize the processed engraving file.

In terms of precision, with an engraving spot of 0.06*0.06mm², the ATOMSTACK P9 M50 allows you to mark on different materials such as metal, ceramic and alumina.

Atomstack Air Assist Kit for Laser Engraving Machine

I am very excited to present the beautifully designed air assist system to all laser engraving enthusiasts, a beautifully designed kit developed by Atomstack that you will love.

We know that having an air assist system is essential when using laser cutting or engraving. Air assist reduces surface temperatures, increases cutting efficiency, prevents material hardening, prevents dust from clogging laser nozzles and protects optics such as focusing lenses.

atomstack air assist system for laser engraving machine

It is for this reason that Atomstack launched their first generation Air Assist system to meet the challenges of a wide range of users. Happily, the Assist system will work with all previous laser engraving models, including the previous A5 series as well as the portable P7 and P9 series.

We see the Atomstack Air Assist system with a 10-30L/min adjustable air pump, two high precision moulded nozzles, goggle lenses and an air duct. The air pump is driven by an external power supply, please select the correct plug size when purchasing.

0 kommentarer